Ashton Road, Golborne
Warrington. WA3 3UL
Tel: 01942 295 170
Fax: 01942 295 171
Email: info@deltalaminates.co.uk

Elite

elite / Noun 1. Regarded as superior 2. Best part of 3. Favoured

L-SHAPED HEAD RAIL fixed over the Pilasters to produce overhead bracing across the whole width of the Cubicle. Postformed Laminate infill fits at head position for continuity and looks

PILASTERS are manufactured from 36mm Medium Density Fibre Board

STYLISH REAR SLIDE With wider throw for more rigidity incorporating rubber

RADIUSED OVAL FRONT PLATE Indicator with emergency release

PEDESTAL Cylindrical heavy duty Pedestal Leg fully adjustable for floor height variation. Incorporating Alan key T-Nut through fix or star fix for anti tamper and extra strength and support

The Illustrious Cubicle

(M_e) (L_a)

Product Options:

Elite (M_e) is designed for projects requiring a Mid Range, aesthetically pleasing system. Ideally suited to dry environments due to the use of melamine for its Partitions and Doors albeit Moisture Resistant, this reduces costs but maximizes appearance. The front of the system utilizes Postformed Pilasters and Head Rail infill which gives the system a smooth pleasing look. Satin Anodised Aluminium Fittings are used for strength, with additional option of being anti-vandal or powder coated if required. This system really is very good value for money.

Click here to view colour options

SPECIFICATION

Divisions/Doors	19mm Moisture Resistant Melamine Faced Chip
Facing	Coloured Melamine from selected range
Edge Detail	Machined Square and Lipped with 2mm Impact Resistant Soft profile PVC
Pilaster/Fascia	30mm Moisture Resistant Chipboard Core
Facing	High Pressure Laminate from selected range
Edge Detail	Postformed Vertical Edges to 12mm Radius, Lipped with 2mm Impact Resistant Soft profile PVC to its horizontal edges.
Support/Fixings	Satin Anodised Aluminium with Cylindrical Height Adjusting Pedestal Support Leg, Oval Face Plate Indicator with Rear Slide and Keep with Channel Brackets and Angle brackets, Aluminium Head Rail, Hinges with Nylon Cams to determine door swing either open or shut. Coat Hook and Sprung Toilet Roll Holder.

DESIGN

Our design team produce full working CAD drawings, with exact dimensions for our production use and for on site requirements.

SURVEYING

Being bespoke fabricators we manufacture all of our products to the exact required sizes even if this means doing the surveying ourselves. This is all a part of our free service which ensures it is right first time.

DIMENSIONS

All manufactured sizes are bespoke and are determined by each project requirement.

In Situations that do not require bespoke sizes, then standard components can be applied. For example, an 800mm wide cubicle by 1500mm deep would be as follows:

All component heights: 1800mm (+150mm clearance)
Internal partition: 1500mm
End-return partitions: 1500mm (1800mm if applied to duct systems)
Inward opening door: 640mm
Outward opening door: 700mm
Mid pilaster: 200mm
End pilaster: 100mm

FEATURES

This system incorporates Postforming to vertical outer edges of the Pilasters and horizontal edges of the Headrail infill giving a more attractive look. Incorporating WBP Plywood core this system even gives a decorative, luxurious look to shower areas or the like.

COMPLIMENTARY PRODUCTS

To accompany this cubicle system we also offer our Attached Panel System (APS) range of Duct Panel Sets and Vanity Units complete with its Pre-assembled, Pre -manufactured laminated framing system with ready aligned secret fixed accessible panels.

Additional items such as Lockers and Bench seating are also available for changing room situations.