Laminate Fabrication and Post Forming

HEAD DETAIL where ceiling is suspended the laminated framing system runs through 50mm to give a fixing point for ceiling trim. If the ceiling is plastered then the top rail is scribed to it. The visible rail left above the panel is 50mm, this gives space for the panel to be lifted off using the secret fixed hook clips connecting the system.

PARTITION is fixed between the panels onto the vertical laminated shadow gap. This detail is nominally 80mm wide giving a 30mm shadow detail either side once the 20mm thick partition is fixed. This gives room in the width to remove the panels without taking out the partition as well as making a pleasing visible feature.

PANEL constructed from 18mm moisture resistant MDF faced with a High Pressure Laminate with a balancing laminate to the reverse of the panel. The Vertical edges are Postformed (radiused) for a pleasing look but a square edge version with PVC lippings is available if preferable. The horizontal edges of the panel are lipped in laminate as the face or alternatively with Impact Resistant 2mm PVC edging.

VERTICAL WALL SHADOW GAP fixed before head detail and plinth. This is 40mm thick for more rigidity. It is normally fixed before tilling and is oversized when manufactured for scribing to uneven walls. Once fixed into position; has normally 30mm showing, to create the shadow.

PLINTH DETAIL whether on Vanity Unit or Duct System the Plinth is always laminated and usually MR MDF or Plywood. The size is either 100mm to accommodate Vinyl Coved Skirt or 150mm to Accommodate Ceramic Tiles or even no skirt detail at all.

OTHER INFORMATION: This system can be manufactured at a lower height for areas that may have window reveals. A Postformed or Bullnosed lid can be incorporated which caps off the top but still gives access into the cistern. The top can be Flat or Sloping depending on the application or appearance that you require.

An integrated system of duct panelling with composite framing, produced under factory controlled conditions, quickly and simply installed. Secret fixed removable panels provide maintenance access to concealed plumbing.

Our design team produce full working CAD drawings, with exact dimensions for our production use and for on site requirements

Being bespoke fabricators we manufacture all of our products to the exact required sizes even if this means doing the surveying ourselves. This is all a part of our free service which ensures it is right first time with no alterations required later.

All manufactured sizes are bespoke and are determined by each project requirement.

In Situations that do not require bespoke sizes, then standard components can be applied. For example, an 800mm wide cubicle with integrated APS would be as follows:

The APS Duct Panelling System incorporates laminated shadow gaps and feature panels either postformed or square edged, fitted to the frame system with secret fixed suspension clips which give access into the duct but also give a pleasing appearance as everything is hidden.

To accompany the APS Duct Panelling System we have eight specialist ranges of Cubicles and Vanity Units.

Additional items such as Lockers and Bench seating are also available for changing room situations.

Duct System

This range for specifying purposes is as follows